Institute of Environmental Management and Quality Control

Permanent URI for this collectionhttps://dspace.njala.edu.sl/handle/20.500.144402/148

Browse

Search Results

Now showing 1 - 2 of 2
  • Item
    Impact of Tailings on Surrounding Streams at a Mining Area in Sierra Leone
    (Science Publishing Group, 2018) Sheriff, Ishmail
    Access to clean water and sanitation is the centerpiece of Africa water vision 2025 and Goal six (6) of the 2030 UN agenda for Sustainable Development. Considering the current national WASH regulatory structures in Sierra Leone, meeting these targets enshrined in the policy documents would be a critical challenge for the government. The overarching objectives sought by the study were to determine the available composition of physio-chemical parameters and evaluate impact of mine tailings on nearby water bodies within the operational areas of Sierra Rutile Mining Company Limited. Twenty-four (24) water samples obtained from six (6) streams were tested for seventeen (17) physical and chemical parameters. About 30% of the indicators were noted to be above the permissible limit of water quality standard in almost all of the sampling sites. A pattern of decrease concentration downstream for Zn, Pb and Cu was observed but those at the tailing points were noted otherwise. The results revealed that mining activities have to an extent negative impact on the local water sources. Consequently, certain indicators were considered to be of public health concern considering their baseline levels. It would be necessary for the company to examine the mechanism of discharge of tailings and strengthen the environmental surveillance within its concessionary areas to enhance sustainability with the ultimate goal to improve environmental performance.
  • Item
    Microplastics in manure: Sources, analytical methods, toxicodynamic, and toxicokinetic endpoints in livestock and poultry
    (Elsevier BV, 2023-04-29) Sheriff, Ishmail
    Microplastics are pollutants of serious environmental and public health concern. Although predominantly known to occur in environmental and biological matrices, emerging scientific evidence has indicated that they can also occur in fecal matter. Animal manure, both raw and treated, is usually applied on farmlands as organic fertilizer, serving as an entry point of microplastic particles into agricultural soil. The present study analyzes the literature on the occurrence of microplastics (sources and analytical methods of detection in livestock and poultry manure), their toxicodynamic, and toxicokinetics endpoints in farm animals. Based on the studies examined herein, there is a lack of harmonization in the sampling, digestion, and extraction procedures for microplastics in animal manure. Microplastics abundance was 9.02 × 102 ± 1.29 × 103 particles/kg-1 in pig, 7.40 × 101 ± 1.29 × 102 particles/kg-1 in cow, 0 to 5000 particles/kg−1 in sheep, and 129.8 ± 82.3 particles/g−1 (0.1298 particles/kg) in chicken manure. Microplastics that have been found in farm animal manure were primarily ingested from microplastics-contaminated feed and plastic mulching film attached to crop residues. However, there are other likely sources (e.g., water, soil, and air) that need to be studied carefully. Despite the limited studies on the fate of microplastics in raw manure, the weight of the currently available scientific evidence shows that they exhibit different characteristics during the treatment of manure. The previous studies were all based on composting experiments. Therefore, research on different treatment methods is required to have a profound sense and a better understanding of the influence of physicochemical properties (shape, size, type, and composition) of microplastics on their fate during manure treatment. Moreover, exposure of animals to microplastics revealed several toxicological effects but more research is needed to clearly understand the dose-response relationship, and absorption, distribution, metabolism, and elimination mechanisms with respect to other factors (microplastic sizes, shapes, polymers, types of additive, and co-contaminants).